Buying Price for Various Gold Plated CPUs, Chips and Fingers
Price Update 12-23-14
This is a video of chip’s you can run across. Enjoy
Refer to the pictures and pricing below for our current pricelist. This page is updated often, so check back regularly!
There are many more diferent types of material we buy that are not shown.
We also buy other gold, silver and precious metal bearing material’s. If the material you have is not on this list send us an email with picture’s for prices.
There is no minimum order size that we buy.
We pay by Paypal, check & cash.
We also offer the recovery and refining of certain gold bearing material such as: Karat gold, gold filled, gold plated and certain gold bearing electronic parts. For more information on this email us with pictures and description of what you have to process.
If you have any questions please Email us at: atmeltrecycling@aol.com
Mixed Ram- $11.50 /lb.
Tin finger Ram only load- $5.00 /lb.
Slot Processors (cleaned)- $9.50 /lb.
Ceramic Eprom’s- $3.00 /lb.
Large Motarola- $70.00 /lb.
Small Motarola- $105.00 /lb.
Pinless ceramic processor- $4.00 /lb.
Hard drive board’s- $8.00/lb.
Cell phones (no batteries)- $5.00/lb.
Cell phone batteries Li-ion- .30 /lb.
Cell phone boards- $8.00/lb.
Cell phone sim card’s- $20.00 /lb.
Satelite receiver cards (Gold square only)- $20.00 /lb.
Hard drives with boards- .85 /lb.
Hard drives no boards- .10 /lb.
Power supplies with wires- .25 /lb.
Power supplies no wires- .15 /lb.
Gold filled and Karat gold, gold plated prices.
Processed 24K Gold- 94% of Spot
Gold plated jewlery- $6.00 /Lb.
Karat scrap (Clean, small deduction for stones)- 80% of spot
Gold filled jewlery (clean, no stones, metal, springs or trash)- $.40 /g
Gold filled eye glass frames (No plastic, screws or glass) -$.90 /g
Gold filled pocket watch cases. Must be clean and no visable wear or brassing.
10 Year- $.65 /g
20 Year- $.80 /g
25 Year- $.90 /g
pic here | price | comment |
$50/lb |
Fingers must be closely trimmed , use pic for reference ….. Please deduct % of overage ( extra board still attached ) from price if your fingers are not cleanly cut as shown ….. | |
$13.50 each |
||
$110 / lb |
INTEL 486 CPU’s ( gold caps ) |
|
$110 / lb |
INTEL 286 and 386 CPU’s ( gold caps ) | |
$90 / lb |
Motarola, LSI , and Sun GX Gold Bottom CPU | |
$39.00/ lb |
Any misc gold cap that is not on this list AMD 5 x 86 , etc …. Send pic for reference and price consideration based on makeup ….. | |
$31 / lb |
||
$27 / lb |
||
$33 / lb |
||
$31 /lb |
||
$60 / lb |
||
$100 / lb |
||
$39 / lb |
||
$245.00/ lb |
||
$50 / lb |
||
$60 / lb |
||
$8 / lb$4.50/ lb
|
These will be seperatedFiber CPU’s No heat sink Fiber CPU’s with metal heat sink | |
$46 / lb |
||
$80 / lb |
These are generally found in Telcom applications , soldered to boards , generally are double sided gold , if you have quantities of the smallest types under 3 grams each, inquire for additonal $$$ | |
$95 / lb |
Must have Gold tops and Full Gold legs , 2.5″ max length | |
$105 / lb |
Must have gold tops and Full Gold legs , 1.5″ max length | |
$100 – $200 / lb |
Whole Boards / Board Only | |
$8 / lb |
||
$8 / lb |
||
$55 / lb |